FOUASSIER, Olivier; HEINTZ, Jean-Marc; CHAZELAS, J.; GEFFROY, Pierre-Marie; SILVAIN, Jean-François

doi:10.1063/1.2244478

Metadatos

Mostrar el registro completo del ítem

Licencia de uso del documento

FOUASSIER, Olivier
Institut de Chimie de la Matière Condensée de Bordeaux [ICMCB]

HEINTZ, Jean-Marc
Institut de Chimie de la Matière Condensée de Bordeaux [ICMCB]

CHAZELAS, J.
THALES Airborne Systems [Elancourt]

Idioma

Article de revue

Este ítem está publicado en

Journal of Applied Physics. 2006, vol. 100, n° 4, p. 043519

American Institute of Physics

Resumen en inglés

Lead containing solder paste is now considered as an environmental threat. In order to eliminate this undesirable environmental impact associated to their production, a family of lead-free solder joint, Sn-3.8Ag-0.7Cu, is proposed. Microstructural and mechanical data of this solder joint have been acquired and compared with the most common used SnPb solder paste. The evolution of the microstructure as well as the failure mode and the mechanical properties of SnAgCu solder joint are discussed as a function of strain rate, annealing treatments, and testing temperature. Tensile tests have been performed, at temperatures ranging from –50 to +150 °C, on bulk samples. Changes of the mechanical properties of bulk tested samples are actually correlated with microstructural changes, as shown by transmission electronic microscopy investigations.< Leer menos

Palabras clave en inglés

SnAgCu alloys

Mechanical properties

Heat and thermomechanical treatments

Deformation

plasticity

and creep

Metadatos

Licencia de uso del documento

Microstructural evolution and mechanical properties of SnAgCu alloys

Idioma

Este ítem está publicado en

Resumen en inglés

Palabras clave en inglés

DOI

Orígen

Centros de investigación