Measuring the thermal properties of green wood by the transient plane source (TPS) technique
DUPLEIX, Anna
Laboratoire Bourguignon des Matériaux et Procédés [LABOMAP]
Department of Forest Products Technology
Leer más >
Laboratoire Bourguignon des Matériaux et Procédés [LABOMAP]
Department of Forest Products Technology
DUPLEIX, Anna
Laboratoire Bourguignon des Matériaux et Procédés [LABOMAP]
Department of Forest Products Technology
< Leer menos
Laboratoire Bourguignon des Matériaux et Procédés [LABOMAP]
Department of Forest Products Technology
Idioma
en
Article de revue
Este ítem está publicado en
Holzforschung. 2012, vol. 67, n° 4, p. 437-445
De Gruyter
Resumen en inglés
The thermal properties of wood in the green state have been determined by the transient plane source (TPS) technique. Data are presented on thermal conductivity ( λ ), heat capacity ( C ), and thermal diffusivity ( κ ) at ...Leer más >
The thermal properties of wood in the green state have been determined by the transient plane source (TPS) technique. Data are presented on thermal conductivity ( λ ), heat capacity ( C ), and thermal diffusivity ( κ ) at moisture contents (MCs) above the fiber saturation point, which are based on measurements using the HotDisk ® apparatus. Four wood species (Douglas fir, beech, birch, and spruce) were tested, and the results are compared with literature data and those obtained by the flash method. A linear relationship was found between the thermal properties λ , C , and κ on the one hand and MC on the other. Equations predicting the thermal values as a function of MC and wood anisotropy are presented. Wood C and λ increase with MC, but wet wood diffuses heat more rapidly than dry wood.< Leer menos
Palabras clave en inglés
transient plane source (TPS)
thermal diffusivity
HotDisk ®
thermal conductivity
green wood
heat capacity
Orígen
Importado de HalCentros de investigación