PINSON, Samuel; GUILLON, Laurent

doi:10.1121/1.3483720

Métadonnées

Afficher la notice complète

Licence d’utilisation du document

PINSON, Samuel
Institut de Recherche de l'Ecole Navale [IRENAV]

GUILLON, Laurent
Institut de Recherche de l'Ecole Navale [IRENAV]

Langue

Article de revue

Ce document a été publié dans

Journal of the Acoustical Society of America. 2010, vol. 128, n° 4, p. 1685-1693

Acoustical Society of America

Résumé en anglais

This paper presents the first results of an imaging technique that measures the geoacoustic structure of a seafloor in shallow water areas. The devices used were a broadband 100 Hz-6 kHz acoustic source towed by a ship and a vertical array. Among all the acoustic paths existing in the water column, two are used: the direct one and the seabed-reflected one, the latter being composed of the reflections from the seafloor's surface as well as that from each buried layer. Due to the good time resolution of the signal and to the short range configuration, the reflected signal can be modeled as a sum of contributions coming from image sources relative to the seabed layers. The seabed geometry and the sound speed profile can then be recovered with the detection and localization of these image sources. The map of the image sources is obtained by a function that combines back-propagation of signals and knowledge of the emitted pulse. The thickness and sound-speed of each layer is finally obtained by a position analysis of the image sources. The results obtained by this data-driven algorithm on both at-sea and synthetic data are satisfactory.< Réduire

Métadonnées

Partager cette publication !

Licence d’utilisation du document

Sound speed profile characterization by the image source method

Langue

Ce document a été publié dans

Résumé en anglais

URI

DOI

Origine

Unités de recherche