NOUARI, Mohammed; CALAMAZ, Madalina; HADDAG, Badis; GIROT, Franck

doi:10.1504/IJMMM.2013.053220

Metadatos

Mostrar el registro completo del ítem

Licencia de uso del documento

NOUARI, Mohammed
Laboratoire d'Energétique et Mécanique Théorique et Appliquée [LEMTA ]

CALAMAZ, Madalina

HADDAG, Badis
Laboratoire d'Energétique et Mécanique Théorique et Appliquée [LEMTA ]

Idioma

Article de revue

Este ítem está publicado en

International Journal of Machining and Machinability of Materials. 2013, vol. 13, n° 2-3, p. 158-173

Inderscience

Resumen en inglés

The current study emphasises the role of coating materials in enhancing the wear resistance of the cutting tool and improving the tool-chip contact. The wear mechanisms have been investigated through a series of cutting experiments performed on an instrumented planer machine. Machining tests were conducted on the usual Ti-6Al-4V alloy (workpiece) and cemented carbide tools. Four new coatings were especially designed for the study: 1diamond (thin layer, about 2 to 3 μm) 2diamond+TiB2+CrN/DLC (diamond like carbon, about 3, 5 μm) 3diamond (thick layer, 6 μm) 4TiB2+CrN/DLC (3 μm). The performance of each coating material was analysed and compared in one hand to the uncoated carbide tools and on the other hand to the CBN reinforced carbide tools in terms of cutting forces and tool wear mechanisms.< Leer menos

Metadatos

Compartir este ítem

Licencia de uso del documento

Analysis of coating performances in machining titanium alloys for aerospace applications

Idioma

Este ítem está publicado en

Resumen en inglés

URI

DOI

Orígen

Centros de investigación