Investigation of the precipitation of Na2SO4 in supercritical water
VOISIN, Thomas
Institut de Chimie de la Matière Condensée de Bordeaux [ICMCB]
INNOVEOX
Agence de l'Environnement et de la Maîtrise de l'Énergie [ADEME]
Voir plus >
Institut de Chimie de la Matière Condensée de Bordeaux [ICMCB]
INNOVEOX
Agence de l'Environnement et de la Maîtrise de l'Énergie [ADEME]
VOISIN, Thomas
Institut de Chimie de la Matière Condensée de Bordeaux [ICMCB]
INNOVEOX
Agence de l'Environnement et de la Maîtrise de l'Énergie [ADEME]
Institut de Chimie de la Matière Condensée de Bordeaux [ICMCB]
INNOVEOX
Agence de l'Environnement et de la Maîtrise de l'Énergie [ADEME]
IVERSEN, Bo Brummerstedt
Center for Materials Crystallography (CMC), Interdisciplinary Nanoscience Center (iNANO)
< Réduire
Center for Materials Crystallography (CMC), Interdisciplinary Nanoscience Center (iNANO)
Langue
en
Article de revue
Ce document a été publié dans
Chemical Engineering Science. 2017-12, vol. 174, p. 268-276
Elsevier
Résumé en anglais
SuperCritical Water Oxidation process (SCWO) is a promising technology for treating toxic and/or complex chemical wastes with very good efficiency. Above its critical point (374 °C, 22.1 MPa), water exhibits particular ...Lire la suite >
SuperCritical Water Oxidation process (SCWO) is a promising technology for treating toxic and/or complex chemical wastes with very good efficiency. Above its critical point (374 °C, 22.1 MPa), water exhibits particular properties and organic compounds can be easily dissolved and degraded with the addition of oxidizing agents. But these interesting properties imply a main drawback regarding inorganic compounds. Highly soluble at ambient temperature in water, these inorganics (such as salts) are no longer soluble in supercritical water and precipitate into solids, creating plugs in SCWO processes. Although this precipitation phenomenon is well known as a limiting factor for SCWO process, it is still not well understood. This work intends to investigate the precipitation phenomenon with a new methodology. A common salt, disodium sulfate (Na2SO4), is taken as a reference for the study. Na2SO4 solubility in sub- and supercritical water is determined on a wide temperature range using a continuous set-up. Crystallite sizes formed after precipitation are measured with in situ synchrotron wide angle X-ray scattering (WAXS). Combining these experimental results, a numerical modeling of the precipitation in supercritical conditions is performed by taking into account all the implied physical phenomena: thermodynamic, hydrodynamic and nucleation & growth.< Réduire
Mots clés en anglais
Supercritical water
Supercritical water oxidation
Salt precipitation
In situ analysis
Numerical modeling
Origine
Importé de halUnités de recherche