BOUDELIER, A.; RITOU, Mathieu; GARNIER, S.; FURET, B.

doi:10.1007/s11740-018-0813-4

Métadonnées

Licence d’utilisation du document

BOUDELIER, A.
Laboratoire Angevin de Mécanique, Procédés et InnovAtion [LAMPA]

RITOU, Mathieu
Robots and Machines for Manufacturing, Society and Services [LS2N - équipe RoMas]
Institut Universitaire de Technologie - Nantes [IUT Nantes]

GARNIER, S.
Robots and Machines for Manufacturing, Society and Services [LS2N - équipe RoMas]
Institut Universitaire de Technologie - Nantes [IUT Nantes]

Langue

Article de revue

Ce document a été publié dans

Production Engineering. 2018-04, vol. 12, n° 2, p. 279 - 287

Penton Publishing

Résumé en anglais

The article presents a cutting force model for trimming operations of CFRP laminate with diamond abrasive cutters. Those tools are more and more encountered on industrial applications of CFRP trimming, due to their abrasion resistance and their low cost. Contrary to endmills, they consist of a large number of cutting grits, randomly distributed around the tool. To tackle the issue, a continuous model of tool engagement is proposed. Validity of the approach is verified. A mechanical model of cutting forces, adapted to CFRP laminate, is then presented. The evolution of specific cutting coefficient in relation to fibres orientation is investigated through a piecewise constant model. It leads to the proposal of a sine model for the specific cutting coefficients. The simulated forces are in good agreement with the experimental results of cutting tests, carried out in multidirectional CFRP laminate for different fibres orientation and widths of cut. Cutting mechanisms are finally discussed depending on fibres orientation. A. Boudelier, M. Ritou, S. Garnier, B. Furet, Cutting force model for machining of CFRP laminate with diamond abrasive cutter, Production Engineering, 2018. http://dx.< Réduire

Mots clés en anglais

cutting force model

composite

trimming

multidirectional CFRP laminate

diamond abrasive cutter

cutting mechanism

Métadonnées

Partager cette publication !

Licence d’utilisation du document

Cutting force model for machining of CFRP laminate with diamond abrasive cutter

Langue

Ce document a été publié dans

Résumé en anglais

Mots clés en anglais

URI

DOI

Origine

Unités de recherche