JAILLON, Agathe; JUMEL, Julien; LACHAUD, Frederic; PAROISSIEN, Eric

doi:10.1016/j.ijsolstr.2019.12.014

Métadonnées

Afficher la notice complète

Licence d’utilisation du document

JAILLON, Agathe
Institut Clément Ader [ICA]

JUMEL, Julien

LACHAUD, Frederic
Institut Clément Ader [ICA]

Langue

Article de revue

Ce document a été publié dans

International Journal of Solids and Structures. 2020-05-15, vol. 191-192, p. 577-587

Elsevier

Résumé en anglais

Adhesive bondline mechanical behaviour is frequently described with cohesive zone models (CZM). For mode I loading condition these phenomenological laws simply represent the evolution of the peel stress as a function of the two adherends relative displacement normal to the joint. Generally, these laws are identified rather than really measured using experimental data obtained from crack initiation and propagation experiments such as the Double Cantilever Beam Test (DCB). The uncertainty on parameter estimation are generally not indicated, as for a DCB test it is only the critical energy release rate that has the most influence on the results. However, the uncertainties on the other parameters prevent the use of the identified TSL for other mechanical tests where mode I solicitations are predominant. In this article, the purpose is to evaluate the methodologies reliability for the assessment of mode I CZM. To do so, several methods used to evaluate CZM parameters are compared in terms parameter estimation reliability. Synthetic noisy data are considered for a χ² function minimisation. Then, sensitivity calculations are performed to determine the estimated parameters standard deviation. By applying this procedure on different type of synthetic measurements (respectively P(), J(,), backface strain and DIC) the ability of these different techniques to capture the best parameters for a chosen CZM shape can be rigorously evaluated.< Réduire

Mots clés en anglais

Chi-square

Cohesive zone model

DIC

Confidence interval

Comparative study

DCB

Sensitivity

Métadonnées

Partager cette publication !

Licence d’utilisation du document

Mode I cohesive zone model parameters identification and comparison of measurement techniques based on uncertainty estimation

Langue

Ce document a été publié dans

Résumé en anglais

Mots clés en anglais

URI

DOI

Origine

Unités de recherche