25 W single-frequency, low noise fiber MOPA at 1120 nm
Language
en
Article de revue
This item was published in
Optics Letters. 2018, vol. 43, n° 2, p. 308-311
Optical Society of America - OSA Publishing
English Abstract
This letter reports on the development of a 25 W single-frequency, all-fiber master-oscillator power amplifier operating at 1120 nm. By heating the gain fiber at 75˚C75˚C, an output power of 25.3 W is achieved with an ...Read more >
This letter reports on the development of a 25 W single-frequency, all-fiber master-oscillator power amplifier operating at 1120 nm. By heating the gain fiber at 75˚C75˚C, an output power of 25.3 W is achieved with an optical-to-optical efficiency of 53.5 %. The output shows no sign of stimulated Brillouin scattering and the signal to amplified spontaneous emission ratio is close to 40 dB. A M 2 value of 1.15 and a polarization extinction ratio of 17 dB are measured. The relative intensity noise of the output is also characterized, reaching-155 dBc/Hz at 10MHz at the maximum output power. The study of the noise dynamics highlights for the first time to the best of our knowledge an unpredicted behavior due to the strong backward amplified spontaneous emission.Read less <
Origin
Hal imported