The system will be going down for regular maintenance. Please save your work and logout.
Processing of highly porous bioglass monoliths by hydrothermal hot pressing
Language
en
Article de revue
This item was published in
Ceramics International. 2022-03, vol. 48, n° 13, p. 18190-18198
Elsevier
English Abstract
Porous bioglass monoliths have been processed by hydrothermal hot pressing (HyHP) from sol-gel and melt-derived bioglass powders of composition (in mol %): SiO2–CaO–P2O5 (55.0-40.0-5.0) and SiO2–CaO–Na2O–P2O5 (47.2-26.4-23.8-2.6), ...Read more >
Porous bioglass monoliths have been processed by hydrothermal hot pressing (HyHP) from sol-gel and melt-derived bioglass powders of composition (in mol %): SiO2–CaO–P2O5 (55.0-40.0-5.0) and SiO2–CaO–Na2O–P2O5 (47.2-26.4-23.8-2.6), respectively. An open porosity of >70% ever reached in 3D structures is reported for monoliths issued from sol-gel powders. Dissolution studies were performed in simulated body fluid (SBF) for 1–30 days. The monoliths were analysed using X-Ray Diffraction (XRD), Fourier Transform Infra-Red (FTIR) spectroscopy and Scanning Electron Microscopy (SEM) to observe the formation of an apatite-like layer and elemental concentration of SBF was evaluated using Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES). A higher kinetics in the development of apatite layer was observed for sol-gel derived monoliths. This result is explained by the high surface areas of the nanosized sol-gel powders and the possibility of HyHP to create large porosity (mesoporous monoliths) and retain large surface areas. HyHP is also effective in processing 3D-bioglass structures with porosity gradient by co-sintering powders of different size.Read less <
English Keywords
Hydrothermal hot pressing
Sol-gel derived bioglass
Highly porous monolith
Melt-derived bioglass
Sintering
Origin
Hal imported