BONNERIC, Matthieu; BRUGGER, Charles; SAINTIER, Nicolas; MORENO, A. Castro; TRANCHAND, B.

doi:10.1016/j.prostr.2022.03.015

BONNERIC, Matthieu
Institut de Mécanique et d'Ingénierie [I2M]

BRUGGER, Charles
Institut de Mécanique et d'Ingénierie [I2M]

SAINTIER, Nicolas
Institut de Mécanique et d'Ingénierie [I2M]

Langue

Article de revue

Ce document a été publié dans

Procedia Structural Integrity. 2022-01-01, vol. 38, p. 141-148

Résumé en anglais

Despite the continuous progress in the additive manufacturing (AM) technologies to improve the quality of the produced parts, the presence of defects induced by the process remains a critical issue for the design of industrial components with respect to fatigue damage. Analytical models such as Kitagawa diagrams represent easy to use tools to predict fatigue strength accounting for the detrimental influence of the defects. They are therefore of great interest from an industrial point of view. The aim of the present work is to evaluate whether artificial defects obtained by placing holes directly into the CAD files of fatigue specimens can be used to establish Kitagawa diagrams, despite some differences in terms of shapes and morphologies between the natural and artificial defects. Two artificial defect geometries with a similar size were studied. For each of these geometries, the experimental fatigue strengths and the real sizes of the critical defects measured from the fracture surfaces were used to determine the parameters of the El-Haddad model. For one of the geometries, the obtained model was able to predict the fatigue strength corresponding to the natural defects, and the associated parameters were found consistent with the literature. The fatigue tests results also highlighted the influence of the defect shape.< Réduire

Mots clés en anglais

Fatigue

Additive manufacturing

Al-Si alloy

Artificial defect

URI

https://oskar-bordeaux.fr/handle/20.500.12278/144670

DOI

http://dx.doi.org/10.1016/j.prostr.2022.03.015

Unités de recherche

Institut de Mécanique et d’Ingénierie de Bordeaux (I2M) - UMR 5295

Voir/Ouvrir

Métadonnées

Partager cette publication !

Licence d’utilisation du document

Contribution of the introduction of artificial defects by additive manufacturing to the determination of the Kitagawa diagram of Al-Si alloys

Langue

Ce document a été publié dans

Résumé en anglais

Mots clés en anglais

URI

DOI

Unités de recherche