CONSTANTIN, Loic; KRAIEM, Nada; WU, Zhipeng; CUI, Bai; BATTAGLIA, Jean-Luc; GARNIER, Christian; SILVAIN, Jean-François; LU, Yong Feng

doi:10.1016/j.addma.2021.101927

Métadonnées

Afficher la notice complète

Licence d’utilisation du document

CONSTANTIN, Loic

University of Nebraska–Lincoln
Institut de Chimie de la Matière Condensée de Bordeaux [ICMCB]

KRAIEM, Nada

Institut de Chimie de la Matière Condensée de Bordeaux [ICMCB]

WU, Zhipeng

Langue

Article de revue

Ce document a été publié dans

Additive Manufacturing. 2021-02-01, vol. 40, p. 101927

Résumé en anglais

Manufacturing complex metal matrix composite (MMC) structures by laser powder-bed fusion (LPBF) could unleash their full potential but is difficult due to the presence of reinforcement. Unmelted particles negatively affect the pool dynamics, cause critical spatter ejections, and form printing defects. In this work, by taking copper (Cu) / diamond (D) composite as an example for its prospective thermal management applications and machinability limitations; we discovered that adding steps to LPBF enables the fabrication of high-quality materials and structures. We demonstrated that adding a recoating step improves the composite quality compared to structures manufactured by conventional LPBF. Adding a remelting step enabled further improvement by limiting the generation of spatter and printing defects, leading to 3D laser print dense (97%), highly thermally conductive (349 W/m K) and complex Cu/5 vol% D structures. Therefore, pursuing research into nonconventional LPBF could open new avenues for manufacturing MMCs.< Réduire

Mots clés en anglais

Additive manufacturing

Copper

Diamond

Selective laser melting

Metal matrix composites

Métadonnées

Partager cette publication !

Licence d’utilisation du document

Manufacturing of Complex Diamond-Based Composite Structures via Laser Powder-Bed Fusion

Langue

Ce document a été publié dans

Résumé en anglais

Mots clés en anglais

URI

DOI

Lien vers les données de la recherche

Unités de recherche