UHART, Maylis; PATROUIX, Olivier; AOUSTIN, Yannick

doi:10.1007/s12008-015-0271-6

Voir/Ouvrir

ESTIA_IJIDM_2015_Uhart.pdf (1.628Mo)

Métadonnées

Afficher la notice complète

Licence d’utilisation du document

UHART, Maylis
ESTIA INSTITUTE OF TECHNOLOGY

PATROUIX, Olivier

ESTIA INSTITUTE OF TECHNOLOGY

AOUSTIN, Yannick

Langue

Article de revue

Ce document a été publié dans

International Journal on Interactive Design and Manufacturing. 2015p. pages, 1-21, Print ISSN 1955-2513, Online ISSN 1955-2505

Résumé en anglais

Composite materials are increasingly used in the demanding field of aeronautics. To meet this growing need, the company Coriolis Composites has developed an Automated Fibre Placement device already on the market. This process uses an industrial manip-ulator robot. This fibre placement task requires a com-pacting strength adapted to the material used. For the robot, the reference trajectories in position of each tape are prescribed off-line. However, accuracy problems of tape placement appear when off-line programmed robot trajectories. The proposed approach to address the accuracy problem and the manufacturing constraints is an interactive manufacturing scheme based on exterocep-tive sensor loops. This paper shows an interactive manufacturing approach based on force servoing to control the compacting strength and on visual servoing to control the lateral position of the tape in order to improve the fibre placement accuracy and then the quality of manufactured parts.< Réduire

Voir/Ouvrir

Métadonnées

Partager cette publication !

Licence d’utilisation du document

Improving manufacturing of aeronautical parts with an enhanced industrial Robotised Fibre Placement Cell using an external force-vision scheme

Langue

Ce document a été publié dans

Résumé en anglais

URI

DOI

Unités de recherche