LI, Qiang; SUN, Liping; ZHAO, Hui; WANG, Hailong; HUO, Lihua; ROUGIER, Aline; FOURCADE, Sébastien; GRENIER, Jean-Claude

doi:10.1016/j.jpowsour.2014.04.025

Metadatos

Mostrar el registro completo del ítem

Licencia de uso del documento

LI, Qiang
Key Laboratory of Functional Inorganic Material Chemistry [KLFIMC]

SUN, Liping
Key Laboratory of Functional Inorganic Material Chemistry [KLFIMC]

ZHAO, Hui
Key Laboratory of Functional Inorganic Material Chemistry [KLFIMC]

Idioma

Article de revue

Este ítem está publicado en

Journal of Power Sources. 2014, vol. 263, p. 125-129

Elsevier

Resumen en inglés

La1.6Sr0.4NiO4 (LSN) nanofibers are prepared by electrospinning technique and used as cathode materials for solid oxide fuel cells (SOFCs) with Ce0.9Gd0.1O1.95 (CGO) as electrolyte. The as-prepared cathode is highly porous but forms a good contact with the CGO electrolyte after rapid sintering at 900 °C for 15 min in air. The electrode performance of LSN nanofibers is measured at various temperatures and under different oxygen partial pressures. Two main oxygen reduction reaction (ORR) processes are identified. The rate limiting step for the ORR is the charge transfer process. The LSN nanofiber cathode exhibits a polarization resistance (Rp) of 0.40 Ω cm2 at 700 °C in air, 0.80 Ω cm2 at 650 °C and 1.59 Ω cm2 at 600 °C. These results demonstrate that the LSN nanofiber architecture significantly enhances the electrochemical activity of these cathodes for the ORR compared to usual porous electrodes, which points out the interest of such a synthesis technique for preparing SOFCs cathode materials with peculiar morphology.< Leer menos

Palabras clave en inglés

Solid oxide fuel cells

Nanofibers cathode

Oxygen reduction reaction

Electrospinning

Metadatos

Licencia de uso del documento

La1.6Sr0.4NiO4 one-dimensional nanofibers as cathode for solid oxide fuel cells

Idioma

Este ítem está publicado en

Resumen en inglés

Palabras clave en inglés

DOI

Orígen

Centros de investigación