LEGUILLON, Dominique; MARTIN, Eric; SEVECEK, Oldrich; BERMEJO, Raul

doi:10.1007/s10704-018-0294-7

MARTIN, Eric
Laboratoire des Composites Thermostructuraux [LCTS]

SEVECEK, Oldrich

Langue

Article de revue

Ce document a été publié dans

International Journal of Fracture. 2018, vol. 212, n° 1

Résumé en anglais

Criteria for predicting initiation of cracks in brittle materials like ceramics are based on two parameters: the material fracture toughness and the tensile strength. Standardized experiments exist to estimate the former. However, the tensile strength is often taken from experiments (mainly uniaxial bending) on specimens with various geometries and surface finish, usually tested under ambient conditions at a given loading rate. The reported strength is commonly the Weibull characteristic strength, which scatters due to the critical defect size distribution on the tested specimen. In this work, we propose a definition of the “inherent” or “intrinsic” tensile strength to be used in numerical models, making a distinction between extrinsic defects due to manufacturing and intrinsic ones relying on the microstructure. Our approach is based on the Finite Fracture Mechanics theory and the Coupled Criterion applied to small surface flaws and its influence on the measured (extrinsic) strength. Numerical results are compared with experiments on alumina reported in the literature. In addition, a model for the Petch law (strength vs. grain size) in polycrystalline materials is proposed using the Coupled Criterion, which predicts an initial crack length of increasing numbers of grains as the grain size decreases.< Réduire

Mots clés en anglais

Ceramics

Crack initiation

Finite fracture mechanics

Coupled criterion

Tensile strength

URI

https://oskar-bordeaux.fr/handle/20.500.12278/112147

DOI

http://dx.doi.org/10.1007/s10704-018-0294-7

Unités de recherche

Laboratoire des Composites Thermo Structuraux (LCTS) - UMR 5801

Voir/Ouvrir

Métadonnées

Partager cette publication !

Licence d’utilisation du document

What is the tensile strength of a ceramic to be used in numerical models for predicting crack initiation?

Langue

Ce document a été publié dans

Résumé en anglais

Mots clés en anglais

URI

DOI

Unités de recherche