Numerical simulation of workpiece thermal field in drilling CFRP/Aluminum alloy
dc.contributor.author | MONTOYA, Maxime | |
dc.contributor.author | CALAMAZ, Madalina | |
dc.contributor.author | GEHIN, Daniel | |
hal.structure.identifier | Escuela de Ingeniería de Bilbao | |
dc.contributor.author | GIROT, Franck | |
dc.date.accessioned | 2021-05-14T09:55:38Z | |
dc.date.available | 2021-05-14T09:55:38Z | |
dc.date.issued | 2014-05-23 | |
dc.identifier.issn | 1013-9826 | |
dc.identifier.uri | https://oskar-bordeaux.fr/handle/20.500.12278/77716 | |
dc.description | Temperature reached at the tool/workpiece interface is difficult to measure during drilling operation, due to its enclosed configuration; numerical simulation is therefore a good alternative to access to this information. The purpose of this study is to develop and carry out numerical simulations in order to estimate the workpiece thermal field generated during drilling. The simulations are validated by comparing simulated and measured temperatures at 4 mm from the holes wall. This method is applied to evaluate thermal field generated during drilling (with chip removing cycles) of CFRP/Aluminum alloy stacks. The influence of the drilling kinematics on the workpiece thermal field is also investigated. | |
dc.description.abstractEn | Temperature reached at the tool/workpiece interface is difficult to measure during drilling operation, due to its enclosed configuration; numerical simulation is therefore a good alternative to access to this information. The purpose of this study is to develop and carry out numerical simulations in order to estimate the workpiece thermal field generated during drilling. The simulations are validated by comparing simulated and measured temperatures at 4 mm from the holes wall. This method is applied to evaluate thermal field generated during drilling (with chip removing cycles) of CFRP/Aluminum alloy stacks. The influence of the drilling kinematics on the workpiece thermal field is also investigated. | |
dc.language.iso | en | |
dc.publisher | Trans Tech Publications | |
dc.subject.en | FEM simulation | |
dc.subject.en | Temperature field | |
dc.subject.en | Drilling | |
dc.subject.en | CFRP/Al | |
dc.title.en | Numerical simulation of workpiece thermal field in drilling CFRP/Aluminum alloy | |
dc.type | Article de revue | |
dc.identifier.doi | 10.4028/www.scientific.net/KEM.611-612.1226 | |
dc.subject.hal | Sciences de l'ingénieur [physics]/Génie des procédés | |
dc.subject.hal | Sciences de l'ingénieur [physics]/Matériaux | |
dc.subject.hal | Sciences de l'ingénieur [physics]/Mécanique [physics.med-ph] | |
dc.subject.hal | Sciences de l'ingénieur [physics]/Mécanique [physics.med-ph]/Thermique [physics.class-ph] | |
bordeaux.journal | Key Engineering Materials | |
bordeaux.page | 1226-1235 | |
bordeaux.volume | 611-612 | |
bordeaux.hal.laboratories | Institut de Mécanique et d’Ingénierie de Bordeaux (I2M) - UMR 5295 | * |
bordeaux.institution | Université de Bordeaux | |
bordeaux.institution | Bordeaux INP | |
bordeaux.institution | CNRS | |
bordeaux.institution | INRAE | |
bordeaux.institution | Arts et Métiers | |
bordeaux.peerReviewed | oui | |
hal.identifier | hal-01203182 | |
hal.version | 1 | |
hal.origin.link | https://hal.archives-ouvertes.fr//hal-01203182v1 | |
bordeaux.COinS | ctx_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.jtitle=Key%20Engineering%20Materials&rft.date=2014-05-23&rft.volume=611-612&rft.spage=1226-1235&rft.epage=1226-1235&rft.eissn=1013-9826&rft.issn=1013-9826&rft.au=MONTOYA,%20Maxime&CALAMAZ,%20Madalina&GEHIN,%20Daniel&GIROT,%20Franck&rft.genre=article |
Files in this item
Files | Size | Format | View |
---|---|---|---|
There are no files associated with this item. |