STEF, Jonathan; POULON-QUINTIN, Angeline; REDJAÏMIA, Abdelkrim; GHANBAJA, Jaafar; FERRY, Olivier; DE SOUSA, Matthias; GOUNÉ, Mohamed

doi:10.1016/j.matdes.2018.06.049

Métadonnées

Afficher la notice complète

Licence d’utilisation du document

STEF, Jonathan
Institut de Chimie de la Matière Condensée de Bordeaux [ICMCB]
WeAre-3D Materials

POULON-QUINTIN, Angeline
Institut de Chimie de la Matière Condensée de Bordeaux [ICMCB]

REDJAÏMIA, Abdelkrim
Institut Jean Lamour [IJL]

Langue

Article de revue

Ce document a été publié dans

Materials & Design. 2018-10, vol. 156, p. 480-493

Elsevier

Résumé en anglais

An original approach based on 2D fracture surface and 3D X-ray tomography analysis is proposed in this paper. Its application in selective laser melting of Ti-6Al-4V provides substantive clarifications regarding both mechanisms of porosity formation and their influence on mechanical properties. Unambiguously, a one-to-one relationship between the scanning strategy pattern and the 3D spatial distribution of porosities is highlighted. In an original manner, the 3D location of porosities, their morphology and their orientation are analyzed with respect to the laser spot path. The results show that pores are mainly localized on the overlay zones and support the lack of energy induced by the lower energy at the periphery of the laser spot as the main mechanism of porosity formation. Finally, both tensile properties and crack path are shown to be influenced by the presence and 3D distribution of porosities< Réduire

Mots clés en anglais

Porosity

Ti-6Al-4V

Selective laser melting

Fracture surface

X-ray tomography

Mechanical properties

Additive manufacturing

Scanning strategy

Métadonnées

Licence d’utilisation du document

Mechanism of porosity formation and influence on mechanical properties in selective laser melting of Ti-6Al-4V parts

Langue

Ce document a été publié dans

Résumé en anglais

Mots clés en anglais

DOI

Origine

Unités de recherche