JOULAIN, Anne; AUDURIER, Valérie; SILVAIN, Jean-François; GADAUD, Pascal; BONNEVILLE, Joël; AZINA, Clio; LU, Yongfeng

doi:10.1016/j.matchar.2021.111364

Métadonnées

Afficher la notice complète

Licence d’utilisation du document

JOULAIN, Anne
Physique des Défauts et de la Plasticité [Institut Pprime] [PDP]

AUDURIER, Valérie
Physique des Défauts et de la Plasticité [Institut Pprime] [PDP]

SILVAIN, Jean-François
Institut de Chimie de la Matière Condensée de Bordeaux [ICMCB]
Department of Electrical and Computer Engineering

Langue

Article de revue

Ce document a été publié dans

Materials Characterization. 2021, vol. 179, p. 111364

Elsevier

Résumé en anglais

In the frame of thermal management applications, copper metal matrix reinforced by carbon fibers (CF) are undoubtedly one of the most promising composites for heat sinks. In this work, two types of composite materials were produced: Cu(Cusingle bondTi)x/CF composites fabricated with a mixture of Cu and Cusingle bondTi powders by a solid-liquid co-existent phase process and Cu/CF composites fabricated without the Cusingle bondTi powder. The mechanical properties and post-deformation microstructures of both composite materials have been investigated. Compression tests were performed at room temperature under constant strain-rate deformation condition. Elastic properties were examined using a dynamic resonant method over the temperature range 20 °C - 250 °C. The results show that the addition of Ti and the resulting formation of the TiC interphase at the Cu-CF interfaces are able to create strong interfacial bonding evidenced by a deformation without pull-out. When the volume fraction of CFs reaches 40%, crack percolation occurs in the Cu(CuTi)/CF composite leading to the sample ruin in case of strong interfaces. In the case of Cu/CF, fiber pull-out allows for deformation.< Réduire

Mots clés en anglais

Metal matrix composite

Microstructure

Mechanical properties

Carbon fiber

Copper matrix

Métadonnées

Licence d’utilisation du document

Correlation of the mechanical properties of Cu/C composite materials with the chemistry of Cu C interfacial zone

Langue

Ce document a été publié dans

Résumé en anglais

Mots clés en anglais

DOI

Origine

Unités de recherche