Cure kinetics and modeling of an epoxy resin cross-linked in the presence of two different diamine hardeners
dc.rights.license | open | |
hal.structure.identifier | Ingénierie des Matériaux Polymères - Laboratoire des Matériaux Polymères et des Biomatériaux [IMP-LMPB] | |
dc.contributor.author | LAHLALI, Nadir Douadi | |
hal.structure.identifier | Ingénierie des Matériaux Polymères - Laboratoire des Matériaux Polymères et des Biomatériaux [IMP-LMPB] | |
dc.contributor.author | NAFFAKH, Mohammed | |
hal.structure.identifier | Ingénierie des Matériaux Polymères - Laboratoire des Matériaux Polymères et des Biomatériaux [IMP-LMPB] | |
hal.structure.identifier | Team 1 LCPO : Polymerization Catalyses & Engineering | |
dc.contributor.author | DUMON, Michel | |
dc.date.accessioned | 2020 | |
dc.date.available | 2020 | |
dc.date.issued | 2005 | |
dc.identifier.issn | 0032-3888 | |
dc.identifier.uri | https://oskar-bordeaux.fr/handle/20.500.12278/20626 | |
dc.description.abstractEn | An epoxy resin diglycidyl ether of bisphenol A (DGEBA) is cross-linked with the help of two aromatic diamine 4,4'diaminodiphenylsulfone (DDS) + 4,4'-methylenebis 3-chloro 2,6-diethylaniline (MCDEA) of nearly equal flexibility but different reactivities. The ratio of the two amines is varied while keeping the stoichiometry of the epoxy/amino hydrogen groups constant. The experimental cure kinetics are studied at four different isothermal temperatures. Their modeling is carried out by a phenomenological Kamal-Sourour kinetic model. The procedure is two-fold: 1) linear combinations of the values of rate constants from the two neat thermosets (based on only one amine) and 2) values calculated directly from isothermal cures of reactive amine mixtures. A good correlation was observed between the experimental data and the model predictions (both procedures). These amine formulations provide "mixed" epoxy thermosets and will be used later to control thermoset/thermoplastic blend morphologies for which reaction kinetics need to be predicted. | |
dc.language.iso | en | |
dc.publisher | Wiley-Blackwell | |
dc.subject.en | RTM | |
dc.subject.en | RATES | |
dc.subject.en | SYSTEM | |
dc.subject.en | NETWORKS | |
dc.subject.en | FORMULATION | |
dc.subject.en | POLYMER | |
dc.subject.en | INDUCED PHASE-SEPARATION | |
dc.subject.en | SCANNING CALORIMETRY | |
dc.subject.en | THERMOSET CURE | |
dc.title.en | Cure kinetics and modeling of an epoxy resin cross-linked in the presence of two different diamine hardeners | |
dc.type | Article de revue | |
dc.identifier.doi | 10.1002/pen.20274 | |
dc.subject.hal | Chimie/Polymères | |
bordeaux.journal | Polymer Engineering and Science | |
bordeaux.page | 1581-1589 | |
bordeaux.volume | 45 | |
bordeaux.hal.laboratories | Laboratoire de Chimie des Polymères Organiques (LCPO) - UMR 5629 | * |
bordeaux.issue | 12 | |
bordeaux.institution | Bordeaux INP | |
bordeaux.institution | Université de Bordeaux | |
bordeaux.peerReviewed | oui | |
hal.identifier | hal-00400269 | |
hal.version | 1 | |
hal.origin.link | https://hal.archives-ouvertes.fr//hal-00400269v1 | |
bordeaux.COinS | ctx_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.jtitle=Polymer%20Engineering%20and%20Science&rft.date=2005&rft.volume=45&rft.issue=12&rft.spage=1581-1589&rft.epage=1581-1589&rft.eissn=0032-3888&rft.issn=0032-3888&rft.au=LAHLALI,%20Nadir%20Douadi&NAFFAKH,%20Mohammed&DUMON,%20Michel&rft.genre=article |
Files in this item
Files | Size | Format | View |
---|---|---|---|
There are no files associated with this item. |