Microcellular Foaming of Polymethylmethacrylate in a Batch Supercritical CO(2) Process: Effect of Microstructure on Compression Behavior
dc.rights.license | open | |
hal.structure.identifier | Laboratoire de Chimie des Polymères Organiques [LCPO] | |
dc.contributor.author | REGLERO RUIZ, José Antonio | |
hal.structure.identifier | Laboratoire Matériaux Endommagement Fiabilité et Ingénierie des Procédés [LAMEFIP] | |
dc.contributor.author | VIOT, Philippe | |
hal.structure.identifier | Laboratoire de Chimie des Polymères Organiques [LCPO] | |
hal.structure.identifier | Team 1 LCPO : Polymerization Catalyses & Engineering | |
dc.contributor.author | DUMON, Michel | |
dc.date.accessioned | 2020 | |
dc.date.available | 2020 | |
dc.date.created | 2010 | |
dc.date.issued | 2010 | |
dc.identifier.issn | 0021-8995 | |
dc.identifier.uri | https://oskar-bordeaux.fr/handle/20.500.12278/20536 | |
dc.description.abstractEn | Microcellular foaming of reinforced core/shell Polymethylmethacrylate (PMMA) was carried out by means of supercritical CO(2) in a single-step process. Samples were produced using a technique based on the saturation of the polymer under high pressure of CO(2) (300 bars, 40 degrees C), and cellular structure was controlled by varying the depressurization rate from 0.5 bar/s to 1.6 x 10(-2) bar/s leading to cell sizes from 1 vim to 200 mu m, and densities from 0.8 to 1.0 g/cm(3). It was found that the key parameter to control cell size was depressurization rate, and larger depressurization rates generated bigger cell sizes. On the other hand, variation of the density of the samples was not so considerable. Low rate compression tests were carried out, analyzing the dependence of mechanical parameters such as elastic modulus, yield stress and densification strain with cell size. Moreover, the calculation of the energy absorbed for each sample is presented, showing an optimum of energy absorption up to 50% of deformation in the micrometer cellular range (here at a cell size of about 5 pm). To conclude, a brief comparison between neat PMMA and the core/shell reinforced PMMA has been carried out, analyzing the effect of the core/shell particles in the foaming behavior and mechanical properties. | |
dc.language.iso | en | |
dc.publisher | Wiley | |
dc.title.en | Microcellular Foaming of Polymethylmethacrylate in a Batch Supercritical CO(2) Process: Effect of Microstructure on Compression Behavior | |
dc.type | Article de revue | |
dc.identifier.doi | 10.1002/app.32351 | |
dc.subject.hal | Chimie/Polymères | |
bordeaux.journal | Journal of Applied Polymer Science | |
bordeaux.page | 320-331 | |
bordeaux.volume | 118 | |
bordeaux.hal.laboratories | Laboratoire de Chimie des Polymères Organiques (LCPO) - UMR 5629 | * |
bordeaux.issue | 1 | |
bordeaux.institution | Bordeaux INP | |
bordeaux.institution | Université de Bordeaux | |
bordeaux.peerReviewed | oui | |
hal.identifier | hal-00679032 | |
hal.version | 1 | |
dc.subject.it | compression properties | |
dc.subject.it | microcellular foam | |
dc.subject.it | PMMA | |
dc.subject.it | supercritical CO2 | |
hal.origin.link | https://hal.archives-ouvertes.fr//hal-00679032v1 | |
bordeaux.COinS | ctx_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.jtitle=Journal%20of%20Applied%20Polymer%20Science&rft.date=2010&rft.volume=118&rft.issue=1&rft.spage=320-331&rft.epage=320-331&rft.eissn=0021-8995&rft.issn=0021-8995&rft.au=REGLERO%20RUIZ,%20Jos%C3%A9%20Antonio&VIOT,%20Philippe&DUMON,%20Michel&rft.genre=article |
Files in this item
Files | Size | Format | View |
---|---|---|---|
There are no files associated with this item. |