Afficher la notice abrégée

hal.structure.identifierTHALES [France]
dc.contributor.authorVANDELLE, Erika
hal.structure.identifierTHALES [France]
dc.contributor.authorBRACCIALE, Gaëtan
hal.structure.identifierTHALES [France]
dc.contributor.authorHOANG, Thi Quynh Van
hal.structure.identifierTHALES [France]
dc.contributor.authorGALINDO, Christophe
hal.structure.identifierCentre Technologique Nouvelle Aquitaine des Composites et des Matériaux Avancés [CANOE ]
dc.contributor.authorFOURNIER, Teddy
hal.structure.identifierCentre Technologique Nouvelle Aquitaine des Composites et des Matériaux Avancés [CANOE ]
dc.contributor.authorVERMOSEN, Yohan
hal.structure.identifierCentre Technologique Nouvelle Aquitaine des Composites et des Matériaux Avancés [CANOE ]
dc.contributor.authorVISSE, Arthur
hal.structure.identifierInstitut de Chimie de la Matière Condensée de Bordeaux [ICMCB]
dc.contributor.authorHEINTZ, Jean-Marc
hal.structure.identifierInstitut de Chimie de la Matière Condensée de Bordeaux [ICMCB]
dc.contributor.authorPENIN, Nicolas
dc.contributor.editorChristian Pichot
dc.contributor.editorMatteo Pastorino
dc.contributor.editorAndrea Randazzo
dc.date.issued2023
dc.date.conference2023-11-15
dc.identifier.isbn979-8-3503-2304-7
dc.description.abstractEnThis paper presents 3D-printed microwave absorbers based on two different carbon-loaded thermoplastics: PEKK (polyetherketoneketone) loaded with carbon nanotubes (CNT) and ABS (acrylonitrile butadiene styrene) loaded with carbon black (CB). Wideband absorption is demonstrated with two structures, for which the fractional bandwidth of operation is adjusted from 105% to 123% by varying the geometry. Thereflection coefficients have been measured and compared to the simulation results from 2 to 18 GHz, showing a good agreement. At normal incidence, the two demonstrators, feature measuredreflection coefficients below -10 dB from 4.8 and 6 to 18 GHz. At best, the reflection coefficient remains below -10 dB for angles of incidence up to 50 for 74% of the measured bandwidth at normal incidence for the TE (Transverse-Electric) polarization and 97% for the TM (Transverse-Magnetic) polarization. Index Terms—3D-printing, absorber, additive manufacturing, carbon black, carbon nanotubes, composite, microwave, wideband.
dc.description.sponsorshipMétamatériaux Absorbants RF à Gradient de réflectivité par méthode additive 3D - ANR-19-ASTR-0017
dc.language.isoen
dc.publisherIEEE
dc.source.title2023 IEEE CAMA : IEEE International Conference on Antenna Measurements and Applications, Genoa, Italy November 15-17, 2023
dc.subject.en3D-printing
dc.subject.enabsorber
dc.subject.encarbon black
dc.subject.encarbon nanotubes
dc.subject.encomposite
dc.subject.enmicrowave
dc.subject.enwideband
dc.title.en3D-printed wideband microwave absorbers using carbon-loaded thermoplastics
dc.typeCommunication dans un congrès
dc.identifier.doi10.1109/CAMA57522.2023.10352908
dc.subject.halChimie/Matériaux
bordeaux.page1063-1067
bordeaux.countryIT
bordeaux.title.proceeding2023 IEEE CAMA : IEEE International Conference on Antenna Measurements and Applications, Genoa, Italy November 15-17, 2023
bordeaux.conference.cityGenoa
bordeaux.peerReviewedoui
hal.identifierhal-04304455
hal.version1
hal.invitednon
hal.proceedingsoui
hal.conference.organizerIEEE
hal.conference.end2023-11-17
hal.popularnon
hal.audienceInternationale
hal.origin.linkhttps://hal.archives-ouvertes.fr//hal-04304455v1
bordeaux.COinSctx_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.btitle=2023%20IEEE%20CAMA%20:%20IEEE%20International%20Conference%20on%20Antenna%20Measurements%20and%20Applications,%20Genoa,%20Italy%20November%2015-17,%202023&rft.date=2023&rft.spage=1063-1067&rft.epage=1063-1067&rft.au=VANDELLE,%20Erika&BRACCIALE,%20Ga%C3%ABtan&HOANG,%20Thi%20Quynh%20Van&GALINDO,%20Christophe&FOURNIER,%20Teddy&rft.isbn=979-8-3503-2304-7&rft.genre=unknown


Fichier(s) constituant ce document

FichiersTailleFormatVue

Il n'y a pas de fichiers associés à ce document.

Ce document figure dans la(les) collection(s) suivante(s)

Afficher la notice abrégée