Foaming Behaviour and Compressive Properties of Microcellular Nanostructured Polystyrene
dc.rights.license | open | |
hal.structure.identifier | Laboratoire de Chimie des Polymères Organiques [LCPO] | |
dc.contributor.author | REGLERO RUIZ, José Antonio | |
hal.structure.identifier | Laboratoire Matériaux Endommagement Fiabilité et Ingénierie des Procédés [LAMEFIP] | |
dc.contributor.author | VIOT, Philippe | |
hal.structure.identifier | Laboratoire de Chimie des Polymères Organiques [LCPO] | |
hal.structure.identifier | Team 1 LCPO : Polymerization Catalyses & Engineering | |
dc.contributor.author | DUMON, Michel | |
dc.date.accessioned | 2020 | |
dc.date.available | 2020 | |
dc.date.created | 2009 | |
dc.date.issued | 2009 | |
dc.identifier.issn | 0262-4893 | |
dc.identifier.uri | https://oskar-bordeaux.fr/handle/20.500.12278/20537 | |
dc.description.abstractEn | A batch foaming process has been employed to obtain microcellular materials from polystyrene plus a SBM copolymer (polystyrene-co-1,4-polybutadiene-co-poly(methyl methacrylate). In the first part of the process, raw materials were mixed and extruded in a proportion 90:10 to obtain the precursor materials, leading to a nanostructured assembly in which SBM self-organizes in the polystyrene matrix. In a second stage, foaming was carried out by means of supercritical CO(2) in a single step-process. Foamed samples were produced using a technique based on the saturation of the polymer under scCO(2), and final properties were controlled by varying the temperature. The swelling in scCO(2) was performed at 300 bar during 16 h, and subsequently releasing the gas with a fixed depressurization rate of 60 bar/min. Temperature was varied from 30 degrees C to 80 degrees C, leading to densities from 1.0 g/cm(3) to 0.5 g/cm(3) and cell sizes from 2 micron to 100 micron. In this part of the work, a comparison between foaming behaviour of neat PS and a nanostructured PS+SBM blend is reported, investigating the role of the nanostructured phase as nucleating agents for microcellular foaming. Finally, low rate compression tests were carried out, analyzing the dependence of mechanical parameters such as elastic modulus, yield stress and densification strain with density. | |
dc.language.iso | en | |
dc.publisher | Smithers Rapra | |
dc.title.en | Foaming Behaviour and Compressive Properties of Microcellular Nanostructured Polystyrene | |
dc.type | Article de revue | |
dc.subject.hal | Chimie/Polymères | |
bordeaux.journal | Cellular Polymers | |
bordeaux.page | 363-385 | |
bordeaux.volume | 28 | |
bordeaux.hal.laboratories | Laboratoire de Chimie des Polymères Organiques (LCPO) - UMR 5629 | * |
bordeaux.issue | 6 | |
bordeaux.institution | Bordeaux INP | |
bordeaux.institution | Université de Bordeaux | |
bordeaux.peerReviewed | oui | |
hal.identifier | hal-00679026 | |
hal.version | 1 | |
hal.origin.link | https://hal.archives-ouvertes.fr//hal-00679026v1 | |
bordeaux.COinS | ctx_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.jtitle=Cellular%20Polymers&rft.date=2009&rft.volume=28&rft.issue=6&rft.spage=363-385&rft.epage=363-385&rft.eissn=0262-4893&rft.issn=0262-4893&rft.au=REGLERO%20RUIZ,%20Jos%C3%A9%20Antonio&VIOT,%20Philippe&DUMON,%20Michel&rft.genre=article |
Fichier(s) constituant ce document
Fichiers | Taille | Format | Vue |
---|---|---|---|
Il n'y a pas de fichiers associés à ce document. |