Mostrar el registro sencillo del ítem
Dataset on fractographic analysis of various SiC-based fibers
| dc.rights.license | open | en_US |
| dc.relation.isnodouble | b6581780-a90c-453a-87a4-6f66e3f0e933 | * |
| hal.structure.identifier | Laboratoire des Composites Thermostructuraux [LCTS] | |
| dc.contributor.author | MAZERAT, Stephane | |
| hal.structure.identifier | Laboratoire des Composites Thermostructuraux [LCTS] | |
| dc.contributor.author | PAILLER, Rene | |
| dc.date.accessioned | 2021-12-07T15:22:24Z | |
| dc.date.available | 2021-12-07T15:22:24Z | |
| dc.date.issued | 2021 | |
| dc.identifier.issn | 23523409 | en_US |
| dc.identifier.other | https://doi.org/10.1016/j.dib.2020.106676 | en_US |
| dc.identifier.uri | https://oskar-bordeaux.fr/handle/20.500.12278/124053 | |
| dc.description.abstractEn | This data article reports a systematic fractographic analysis of SiC-based filaments aiming at stress intensity factors assessment. A total of 11 fiber types (as-received or chlorinated Nicalon® and Tyranno® of all three generations) where therefore repeatedly tensile tested to generate the fracture surfaces. The tensile strengths were found to be independent to defect location (surface or internal). The well-known linear square root dependence of strength on mirror, mist or hackle outer radius was reaffirmed. These measurements reveal some residual tensile stresses on Nicalon® fibers, statement however questioned by the broad data scattering. Moreover, it is shown the surface etching treatment didn't affected (generating or releasing) such residual stress. A null y-intercept was consequently adopted to assess the characteristic stress intensity factors (KIC, mirror, mist or hackle constants). The toughness (KIC) estimated this way ranges from 1.0 to 1.9 MPa m1/2 and shows a clear dependency to substrate composition: higher values were extracted on oxygen-free fibers. The Am/KIC ratio, estimated to equal 1.8 and independent to substrate type, is a key parameter that would assist further fractographic investigations. | |
| dc.language.iso | EN | en_US |
| dc.rights | Attribution 3.0 United States | * |
| dc.rights.uri | http://creativecommons.org/licenses/by/3.0/us/ | * |
| dc.subject.en | SiC fiber | |
| dc.subject.en | Fractographic analysis | |
| dc.subject.en | Toughness | |
| dc.subject.en | Mirror | |
| dc.title.en | Dataset on fractographic analysis of various SiC-based fibers | |
| dc.title.alternative | Data in Brief | en_US |
| dc.type | Article de revue | en_US |
| dc.identifier.doi | 10.1016/j.dib.2020.106676 | en_US |
| dc.subject.hal | Sciences de l'ingénieur [physics]/Mécanique [physics.med-ph] | en_US |
| bordeaux.journal | Data in Brief | en_US |
| bordeaux.page | 106676 | en_US |
| bordeaux.volume | 34 | en_US |
| bordeaux.hal.laboratories | Laboratoire des Composites Thermo Structuraux (LCTS) - UMR 5801 | en_US |
| bordeaux.institution | Université de Bordeaux | en_US |
| bordeaux.institution | CNRS | en_US |
| bordeaux.institution | CEA | en_US |
| bordeaux.peerReviewed | oui | en_US |
| bordeaux.inpress | non | en_US |
| hal.identifier | hal-03469381 | |
| hal.version | 1 | |
| hal.date.transferred | 2021-12-07T15:22:27Z | |
| hal.export | true | |
| dc.rights.cc | CC BY-NC-ND | en_US |
| bordeaux.COinS | ctx_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.jtitle=Data%20in%20Brief&rft.date=2021&rft.volume=34&rft.spage=106676&rft.epage=106676&rft.eissn=23523409&rft.issn=23523409&rft.au=MAZERAT,%20Stephane&PAILLER,%20Rene&rft.genre=article |
