CALAMAZ, Madalina; COUPARD, Dominique; GIROT, Franck

doi:10.1016/j.ijmachtools.2007.10.014

Métadonnées

Afficher la notice complète

Licence d’utilisation du document

CALAMAZ, Madalina

COUPARD, Dominique

GIROT, Franck

Langue

Article de revue

Ce document a été publié dans

International Journal of Machine Tools and Manufacture. 2008-03, vol. 48, n° 3-4, p. 275-288

Elsevier

Résumé en anglais

A new material constitutive law is implemented in a 2D finite element model to analyse the chip formation and shear localisation when machining titanium alloys. The numerical simulations use a commercial finite element software (FORGE 2005) able to solve complex thermo-mechanical problems. One of the main machining characteristics of titanium alloys is to produce segmented chips for a wide range of cutting speeds and feeds. The present study assumes that the chip segmentation is only induced by adiabatic shear banding, without material failure in the primary shear zone. The new developed model takes into account the influence of strain, strain rate and temperature on the flow stress and also introduces a strain softening effect. The tool chip friction is managed by a combined Coulomb-Tresca friction law. The influence of two different strain softening levels and machining parameters on the cutting forces and chip morphology has been studied. Chip morphology, cutting and feed forces predicted by numerical simulations are compared with experimental results.< Réduire

Mots clés en anglais

machining

finite element method

clip segmentation

Métadonnées

Partager cette publication !

Licence d’utilisation du document

A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti-6Al-4V

Langue

Ce document a été publié dans

Résumé en anglais

Mots clés en anglais

URI

DOI

Origine

Unités de recherche