RANC, Nicolas; PALIN LUC, Thierry; PARIS, Paul

doi:10.1016/j.engfracmech.2010.11.010

Metadatos

Mostrar el registro completo del ítem

Licencia de uso del documento

RANC, Nicolas
Laboratoire Procédés et Ingénierie en Mécanique et Matériaux [PIMM]

PALIN LUC, Thierry

PARIS, Paul

Idioma

Article de revue

Este ítem está publicado en

Engineering Fracture Mechanics. 2011-04, vol. 78, n° 6, p. 961-972

Elsevier

Resumen en inglés

Plastic dissipation at the crack tip under cyclic loading is responsible for the creation of an heterogeneous temperature field around the crack tip. A thermomechanical model is proposed in this paper for the theoretical problem of an infinite plate with a semi-infinite through crack under mode I cyclic loading both in plane stress or in plane strain condition. It is assumed that the heat source is located in the reverse cyclic plastic zone. The proposed analytical solution of the thermo-mechanical problem shows that the crack tip is under compression due to thermal stresses coming from the heterogeneous stress field around the crack tip. The effect of this stress field on the stress intensity factor (its maximum and its range) is calculated analytically for the infinite plate and by finite element analysis. The heat flux within the reverse cyclic plastic zone is the key parameter to quantify the effect of dissipation at the crack tip on the stress intensity factor< Leer menos

Palabras clave en inglés

Plastic dissipation

Reverse cyclic plastic zone

Stress intensity factor

Thermal stress

Metadatos

Compartir este ítem

Licencia de uso del documento

Thermal effect of plastic dissipation at the crack tip on the stress intensity factor under cyclic loading

Idioma

Este ítem está publicado en

Resumen en inglés

Palabras clave en inglés

URI

DOI

Orígen

Centros de investigación