Creep-fatigue interactions in pure Tantalum under constant and variable amplitude
Idioma
en
Communication dans un congrès avec actes
Este ítem está publicado en
13th International Conference on Creep and Fracture of Engineering Materials and Structures, 2015-06-02, Toulouse. 2015-06
Resumen en inglés
Due to its specific mechanical properties, tantalum is often used in strength-demanding military applications. High cycle fatigue (HCF) behaviour of pure tantalum, however, has been rarely reported and the mechanisms at ...Leer más >
Due to its specific mechanical properties, tantalum is often used in strength-demanding military applications. High cycle fatigue (HCF) behaviour of pure tantalum, however, has been rarely reported and the mechanisms at stake to account for deformation under cyclic loadings are still badly understood [1-2]. This presentation aims at better understanding the HCF damage mechanisms encountered in pure tantalum under such loadings.HCF loadings at various frequencies were performed in tension at room temperature on commercially-pure tantalum. Mean stress effects and frequency effects were investigated in the aim of clarifying the interaction between fatigue and creep.For symmetrical loadings (R=-1, i.e. under zero mean stress), fracture mechanisms were observed to vary from intergranular to transgranular when the maximum stress was decreased. For non-symmetrical loadings (R>0, with sufficiently large mean stress), a transition was also observed from extensive necking to intergranular initiation. Important creep activation was deduced from the presence of necking. This prevalence of creep at room temperature was actually confirmed by two other phenomena:a) The large influence of the frequency on fatigue life, indicating time-dependent damage.b) Important creep deformation during room-temperature creep tests.Finally, complex sequential loadings, representative of in-service loadings, were applied to pure tantalum specimens. The contribution of each loading sequence to the overall damage was quantified. It was shown that linear cumulative damage rules (analogous to Miner’s law to account for fatigue damage and for creep damage) failed to predict life duration of pure tantalum. The ONERA model [3-4], which specifically accounts for creep-fatigue interactions, granted better results. However, it is important to notice that this model uses engineering stresses as input, assuming that the specimen cross-section does not evolve drastically during fatigue/creep deformation. Such hypothesis needs to be revisited as the true stress seems a more realistic input to account for creep damage.< Leer menos
Palabras clave en inglés
High Cycle Fatigue (HCF)
Variable Amplitude Loading
Tantalum
Cumulative Damage
Fatigue- Creep Interaction
Orígen
Importado de HalCentros de investigación