EL CHEIKH, Hussam; COURANT, Bruno; BRANCHU, Samuel; HUANG, Xiaowei; HASCOËT, Jean-Yves; GUILLÉN, Ronald

doi:10.1016/j.optlaseng.2012.07.002

Metadatos

Mostrar el registro completo del ítem

Licencia de uso del documento

EL CHEIKH, Hussam
État Mécanique et Microstructure des Matériaux [E3M]

COURANT, Bruno
État Mécanique et Microstructure des Matériaux [E3M]

BRANCHU, Samuel
État Mécanique et Microstructure des Matériaux [E3M]

Idioma

Article de revue

Este ítem está publicado en

Optics and Lasers in Engineering. 2012, vol. 50, n° 12, p. 1779-1784

Elsevier

Resumen en inglés

Direct Laser Fabrication is a promising manufacturing technology. A moving laser beam heats a coaxially delivered powder in a gas jet through nozzle in order to fabricate an end-use part directly. The clad geometry is an important process characteristic. In this work, different velocities and different laser shift-distances between two successive layers are used to build walls. For each condition, 1, 3, 5 and 10 layers walls are analyzed, showing the domain of a success and optimal construction. A relationship between the process parameters and the wall height is obtained with a good correlation. In addition a linear relationship relates the wall height to the number of layers. Columnar dendrites are observed on the bottom laser clad and equiaxed grains on the top one. Microhardness measurements show a homogeneous microhardness in each layer but a higher microhardness in the first one.< Leer menos

Palabras clave en inglés

Direct Laser Fabrication

316L stainless steel

Laser track geometry

Microstructure

Microhardness

Metadatos

Compartir este ítem

Licencia de uso del documento

Direct laser fabrication process with coaxial powder projection of 316L steel. Geometrical characteristics and microstructure characterization of wall structures

Idioma

Este ítem está publicado en

Resumen en inglés

Palabras clave en inglés

URI

DOI

Orígen

Centros de investigación