Mostrar el registro sencillo del ítem

dc.rights.licenseopen
dc.contributor.authorEVANS, Philip D.
hal.structure.identifierArclin, Res & Technol
dc.contributor.authorGIBSON, Sara Kraushaar
dc.contributor.authorCULLIS, Ian
dc.contributor.authorLIU, Chunling
hal.structure.identifierLaboratoire de Chimie des Polymères Organiques [LCPO]
hal.structure.identifierTeam 2 LCPO : Biopolymers & Bio-sourced Polymers
dc.contributor.authorSÈBE, Gilles
dc.date.accessioned2020
dc.date.available2020
dc.date.issued2013
dc.identifier.issn0141-3910
dc.identifier.urihttps://oskar-bordeaux.fr/handle/20.500.12278/20405
dc.description.abstractEnPhenol formaldehyde (PF) resin containing low molecular weight hydroxymethyl phenol species and a water soluble hindered amine light stabilizer (HALS) was synthesized and used to treat wood veneers. Treated veneers were exposed to natural weathering for 25, 35 and 50 days and the effectiveness of the modified PF resins as photoprotective treatments for wood was assessed. We hypothesized that the photostability of veneers would be positively correlated with concentration of PF resin (10, 20 and 30% w/v) and HALS (1 or 2% w/w) in solutions used to treat veneers. There was an inverse relationship between resin concentration in treatment solutions and tensile strength losses of treated veneers exposed to natural weathering. Mass losses of veneers treated with solutions containing 20 or 30% PF resin were lower than those of veneers treated with 10% PF resin. The addition of 2% HALS to solutions containing 30% PF resin had a significant (p < 0.05) effect at restricting mass and tensile strength losses of treated veneers exposed to the weather for 50 days. A PF resin treatment containing 30% resin and 2% HALS was as effective as chromic acid (a noted photostabilizer for wood) at restricting mass and tensile strength losses of veneers during natural weathering. Treated veneer in a plywood-type composite became darker and redder when exposed outdoors, but the addition of HALS to the resin restricted color changes of veneer treated with 10% PF resin. A 30% PF resin treatment on its own or containing 2% HALS protected wood's cellular structure from destruction during accelerated weathering and restricted, but did not prevent delignification of wood. We conclude that the effectiveness of low molecular weight PF resin as a photoprotective treatment for wood can be improved by increasing the concentration of PF resin and by combining it with a water soluble HALS. (C) 2012 Elsevier Ltd. All rights reserved.
dc.language.isoen
dc.publisherElsevier
dc.subject.enWood
dc.subject.enPhenol formaldehyde resin
dc.subject.enHindered amine light stabilizer
dc.subject.enPhotostability
dc.subject.enWeathering
dc.subject.enLignin
dc.title.enPhotostabilization of wood using low molecular weight phenol formaldehyde resin and hindered amine light stabilizer
dc.typeArticle de revue
dc.identifier.doi10.1016/j.polymdegradstab.2012.10.015
dc.subject.halChimie/Polymères
bordeaux.journalPolymer Degradation and Stability
bordeaux.page158-168
bordeaux.volume98
bordeaux.hal.laboratoriesLaboratoire de Chimie des Polymères Organiques (LCPO) - UMR 5629*
bordeaux.issue19
bordeaux.institutionBordeaux INP
bordeaux.institutionUniversité de Bordeaux
bordeaux.peerReviewedoui
hal.identifierhal-00915938
hal.version1
hal.origin.linkhttps://hal.archives-ouvertes.fr//hal-00915938v1
bordeaux.COinSctx_ver=Z39.88-2004&amp;rft_val_fmt=info:ofi/fmt:kev:mtx:journal&amp;rft.jtitle=Polymer%20Degradation%20and%20Stability&amp;rft.date=2013&amp;rft.volume=98&amp;rft.issue=19&amp;rft.spage=158-168&amp;rft.epage=158-168&amp;rft.eissn=0141-3910&amp;rft.issn=0141-3910&amp;rft.au=EVANS,%20Philip%20D.&amp;GIBSON,%20Sara%20Kraushaar&amp;CULLIS,%20Ian&amp;LIU,%20Chunling&amp;S%C3%88BE,%20Gilles&amp;rft.genre=article


Archivos en el ítem

ArchivosTamañoFormatoVer

No hay archivos asociados a este ítem.

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem