TAYEH, Toufic; DOUIN, Joël; JOUANNIGOT, Stéphane; ZAKHOUR, Mirvat; NAKHL, Michel; SILVAIN, Jean-François; BOBET, Jean-Louis

doi:10.1016/j.msea.2013.10.065

Metadatos

Licencia de uso del documento

TAYEH, Toufic
Laboratoire de Chimie Physique des Matériaux [LCPM]
Institut de Chimie de la Matière Condensée de Bordeaux [ICMCB]

DOUIN, Joël
Centre d'élaboration de matériaux et d'études structurales [CEMES]

JOUANNIGOT, Stéphane
Laboratoire des Composites Thermostructuraux [LCTS]

Idioma

Article de revue

Este ítem está publicado en

Materials Science and Engineering: A. 2014, vol. 591, p. 1-8

Elsevier

Resumen en inglés

Different milling conditions have been tried to produce nanoparticles of TiB2 to be used as reinforcement in Al matrix composite materials. The milling of TiB2 compounds leads to a decrease of both the crystallite size and the particle size. Moreover, we demonstrate that the use of optimized conditions with a vibratory miller allows - in a short period of time - the direct synthesis of nanoparticles of TiB2 starting from the elemental powders (Ti and B). Then TiB2 reinforced Al composite was fabricated using a simple powder metallurgy process followed by free sintering under controlled atmosphere. The influence of (i) the nanometric TiB2 particles grain size and (ii) their volume fraction on the hardness and Young's modulus, measured from nanoindentation tests, has been analyzed.< Leer menos

Palabras clave

Metal-matrix composites (MMCs)

Nanoparticles

Mechanical properties

X-ray diffraction (XRD)

Powder processing

Metadatos

Licencia de uso del documento

Hardness and Young's modulus behavior of Al composites reinforced by nanometric TiB2 elaborated by mechanosynthesis

Idioma

Este ítem está publicado en

Resumen en inglés

Palabras clave

DOI

Orígen

Centros de investigación