Identification and modelling of the oxygen gas diffusion impedance in SOFC porous electrodes: application to Pr2NiO4+δ
Language
en
Article de revue
This item was published in
Electrochimica Acta. 2015, vol. 174, p. 1030-1040
Elsevier
English Abstract
An in-depth analysis of the very low frequency impedance arcs observed when measuring efficient solid oxide fuel cell electrodes by electrochemical impedance spectroscopy (EIS) is reported in this paper. The study was ...Read more >
An in-depth analysis of the very low frequency impedance arcs observed when measuring efficient solid oxide fuel cell electrodes by electrochemical impedance spectroscopy (EIS) is reported in this paper. The study was carried out on Pr2NiO4+δ//Ce0.8Gd0.2O2- δ//3 mol.% Y2O3-ZrO2 symmetrical half-cell. In the temperature range 500–900 °C, three impedance arcs related to O2 molecular diffusion were distinguished from the EIS measurements. Based on theoretical calculations using the Adler-Lane-Steele (ALS) and Dusty gas models, the arc at highest frequencies was ascribed to the diffusion of O2 in the porous structures of the electrode and collecting gold grid. It obeys the ALS model, i.e. a parallel R//C impedance with a capacitance coming mainly from the solid phase. The second arc at medium frequencies was ascribed to the diffusion of O2 in the porous structure of the ceramic part used to maintain the gold grid. It follows the Dusty gas model, i.e. a Warburg impedance with relaxation time depending on the gas phase properties. Finally, the third one at lowest frequencies was ascribed to the “gas conversion” phenomenon, coming from a difference in the local pO2 above the active sites of the working and counter electrodes. This gas conversion impedance largely increases when clogging the channels of the gas distribution system.Read less <
European Project
Robust Advanced Materials for metal Supported SOFC
Origin
Hal imported