GIROIRE, Baptiste; ALI AHMAD, Mohamed; AUBERT, Guillaume; TEULÉ-GAY, Lionel; MICHAU, Dominique; WATKINS, James J.; AYMONIER, Cyril; POULON-QUINTIN, Angeline

doi:10.1016/j.tsf.2017.09.002

Metadatos

Mostrar el registro completo del ítem

Licencia de uso del documento

GIROIRE, Baptiste
Institut de Chimie de la Matière Condensée de Bordeaux [ICMCB]

ALI AHMAD, Mohamed
Institut de Chimie de la Matière Condensée de Bordeaux [ICMCB]

AUBERT, Guillaume
Institut de Chimie de la Matière Condensée de Bordeaux [ICMCB]

Idioma

Article de revue

Este ítem está publicado en

Thin Solid Films. 2017, vol. 643, p. 53-59

Elsevier

Resumen en inglés

A comparison of crystallinity, microstructure, surface morphology and electrical conductivity is proposed for the deposition of copper films, using supercritical fluid chemical deposition (SFCD) and RF magnetron sputtering techniques. Both preparation methods yield nanocrystalline Cu films (< 100 nm) but SFCD gives access to a higher crystallinity for the same AlN substrate temperature during the deposit. Based on the film characteristics, a comparison of the evolution of electrical properties is done for RF magnetron sputtered copper films and SFCD ones with H2 as reducing agent. Uniform strain values are significantly reduced when SFCD technique is used and crystallinity is highly increased leading to lower resistivity values for a same crystallite size. This study demonstrates the viability of the SFCD technique to produce high quality nanostructured copper thin films with low resistivity values.< Leer menos

Palabras clave en inglés

Supercritical fluid chemical deposition

Copper

Thin films

Sputtering

Resistivity

Microstructure

Metadatos

Licencia de uso del documento

A comparative study of copper thin films deposited using magnetron sputtering and supercritical fluid deposition techniques

Idioma

Este ítem está publicado en

Resumen en inglés

Palabras clave en inglés

DOI

Orígen

Centros de investigación