LiNiVO4–promising thin films for use as anode material in microbatteries
Idioma
en
Article de revue
Este ítem está publicado en
Journal of Power Sources. 2003, vol. 119-121, p. 101-105
Elsevier
Resumen en inglés
Thin films of lithium nickel vanadates (LixNiVyOz) have been prepared by radio frequency magnetron sputtering from a LiNiVO4 target. The discharge gas was either pure argon or a mixture of argon and oxygen. The deposition ...Leer más >
Thin films of lithium nickel vanadates (LixNiVyOz) have been prepared by radio frequency magnetron sputtering from a LiNiVO4 target. The discharge gas was either pure argon or a mixture of argon and oxygen. The deposition rates as well as the composition and morphology of the films strongly depend on the sputtering parameters. For a total pressure of 1 Pa, the V/Ni atomic ratio varies between 0.75 for films developed in a pure argon plasma and 1.65 when the partial pressure of oxygen is 100 mPa. The thin film containing the two types of transition metals in an equiatomic ratio (Li1.1NiVO4) has given the best electrochemical properties as an anode displaying a specific capacity that became stable at 1000 mAh/g after three cycles, which is at least as high as for bulk material.< Leer menos
Palabras clave en inglés
Radio frequency sputtering
Thin films
Lithium batteries
Anode
LiNiVO4
Orígen
Importado de HalCentros de investigación