KHAIR, Mira; RIGLET-MARTIAL, Chantal; MATHERON, Pierre; LÉCHELLE, Jacques; PALANCHER, Hervé; ILTIS, Xavière; TARISIEN, Nicolas; HEINTZ, Jean-Marc

doi:10.1016/j.jeurceramsoc.2019.11.005

Metadatos

Licencia de uso del documento

KHAIR, Mira
CEA-Direction des Energies (ex-Direction de l'Energie Nucléaire) [CEA-DES (ex-DEN)]
Institut de Chimie de la Matière Condensée de Bordeaux [ICMCB]

RIGLET-MARTIAL, Chantal
CEA-Direction des Energies (ex-Direction de l'Energie Nucléaire) [CEA-DES (ex-DEN)]

MATHERON, Pierre
CEA-Direction des Energies (ex-Direction de l'Energie Nucléaire) [CEA-DES (ex-DEN)]

Idioma

Article de revue

Este ítem está publicado en

Journal of the European Ceramic Society. 2020, vol. 40, n° 4, p. 1626-1638

Elsevier

Resumen en inglés

An innovative laboratory process making use of the specific properties of solid redox buffers was developed for producing O2 self-regulated UO2 fuel samples. The method was optimized using Molybdenum and Niobium oxide buffers. The starting materials were first mixed with the UO2 powder, then pressed into pellets and finally sintered in a quasi-closed vessel at 1670 °C under strictly controlled oxygen potential using appropriate solid redox buffers. Speciation of Mo and Nb was characterized using Scanning Electron Microscopy (SEM) combined with Energy Dispersive X-ray spectroscopy (EDX) as well as X-ray Diffraction (XRD). Using this optimized procedure, both oxido-reducing forms of the O2 buffer incorporated into the UO2 specimens were preserved during sintering, allowing an in situ control of the O2 partial pressure inside the material. The processing methodology, the laboratory experimental set-up, the sintering procedure and the characteristics of the final oxygen buffered UO2 fuel are described. This work opens the path to representative laboratory studies related to the redox dependent behavior of irradiated fuels in reactor.< Leer menos

Palabras clave en inglés

Molybdenum

Niobium

Uranium

Oxide

Fuel

Thermodynamics

Oxido-reduction

Oxygen buffer

Redox buffer

O2 regulation

dopant

Metadatos

Licencia de uso del documento

In situ control of oxygen partial pressure in a buffered UO2 fuel: A manufacturing process

Idioma

Este ítem está publicado en

Resumen en inglés

Palabras clave en inglés

DOI

Orígen

Centros de investigación