Electrochemical performances in temperature for a C-containing LiFePO4 composite synthesized at high temperature
Language
en
Article de revue
This item was published in
Journal of Power Sources. 2008, vol. 183, n° 1, p. 411-417
Elsevier
English Abstract
C-LiFePO4 composite was synthesized by mechano-chemical activation using iron and lithium phosphates and also cellulose as carbon precursor; this mixture was heated at 800 °C under argon during a short time. Long-range ...Read more >
C-LiFePO4 composite was synthesized by mechano-chemical activation using iron and lithium phosphates and also cellulose as carbon precursor; this mixture was heated at 800 °C under argon during a short time. Long-range cyclings at different temperatures (RT, 40 and 60 °C) and at C/20 rate between 2 and 4.5 V vs. Li+/Li were carried out with this C-LiFePO4 material as positive electrode material in lithium cells. Whatever the cycling conditions used, rather good electrochemical performances were obtained, with a capacity close to the theoretical one and a good cycle life, especially at RT – up to 100 cycles – and at 40 °C with not, vert, similar80% of the initial capacity maintained after 100 cycles. The electrodes recovered after long-range cyclings were characterized by X-ray diffraction; whatever the cycling temperature no significant structural changes (cell parameters, bond lengths, etc.) were shown to occur. Nevertheless, iron was found to be present at the negative electrode – as already observed by Amine et al. – after long-range cycling at 60 °C: other analyses have to be done to identify the origin of this iron (from an impurity or from LiFePO4 itself) and to quantify this amount vs. that of active C-LiFePO4 material using larger cells.Read less <
English Keywords
Lithium-ion batteries
LiFePO4
Electrochemical properties
Cycling in temperature
Structural stability
X-ray diffraction
Origin
Hal imported