Application of the stagnant stage concept for monitoring Mn partitioning at the austenite-ferrite interface in the intercritical region for Fe-Mn-C alloys
GOUNÉ, Mohamed
ArcelorMittal Maizières Research SA
Institut de Chimie de la Matière Condensée de Bordeaux [ICMCB]
Leer más >
ArcelorMittal Maizières Research SA
Institut de Chimie de la Matière Condensée de Bordeaux [ICMCB]
GOUNÉ, Mohamed
ArcelorMittal Maizières Research SA
Institut de Chimie de la Matière Condensée de Bordeaux [ICMCB]
< Leer menos
ArcelorMittal Maizières Research SA
Institut de Chimie de la Matière Condensée de Bordeaux [ICMCB]
Idioma
en
Article de revue
Este ítem está publicado en
Philosophical Magazine Letters. 2012, vol. 92, p. 8 p.
Taylor & Francis
Resumen en inglés
The length of the stagnant stage during the new ferrite growth starting from a mixture of austenite and ferrite has been investigated for a Fe-0.17Mn-0.023C (wt%) alloy. It was found that the stagnant stage depends on the ...Leer más >
The length of the stagnant stage during the new ferrite growth starting from a mixture of austenite and ferrite has been investigated for a Fe-0.17Mn-0.023C (wt%) alloy. It was found that the stagnant stage depends on the thermal path followed to create the mixture, and deduce that the tie-lines for austenite to ferrite transformation are quite different from those for ferrite to austenite transformation. The length of the stagnant stage is determined by the very local partitioning effect at the interface, and it can be used as a tool to monitor the Mn partitioning.< Leer menos
Palabras clave en inglés
Interface
Diffusion
Kinetics
Dilatometry
Phase transformations
Orígen
Importado de HalCentros de investigación