BAUSSENS, O.; MONTÉMONT, G.; VERILHAC, J. M.; HIRSCH, Lionel; GROS-DAILLON, E.

doi:10.1016/j.nima.2022.166904

Idioma

Article de revue

Este ítem está publicado en

Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 2022-09, vol. 1038, p. 166904

Resumen en inglés

Metal halide perovskites have been studied since 2016 for gamma-ray spectroscopy applications. In this work, we study devices based on methylammonium lead tribromide single crystals as gamma-ray detectors. These detectors can measure the signal of a single gamma-ray photon but the energy resolution is limited by the noise of the detectors. Such noise is multicomponent and a deeper investigation was carried out by measuring the noise power spectral density of the devices for different bias voltages. Non-biased devices were found to behave as an idealized equivalent electrical circuit with the main noise source being thermal noise. In the case of biased devices, the dominant noise source is found to be the 1/f noise which becomes preponderant at lower frequency (<1 MHz). These results demonstrate the major contribution of the flicker noise in perovskite detectors of this kind and lay the foundation for next developments to make them compatible with spectrometric applications.< Leer menos

Palabras clave en inglés

Lead halide perovskite

Gamma-ray detector

Noise power spectral density

URI

https://oskar-bordeaux.fr/handle/20.500.12278/140486

DOI

http://dx.doi.org/10.1016/j.nima.2022.166904

Proyecto europeo

Perovskites for Spectrometric X-ray Imaging (PerXI)

Centros de investigación

IMS : Laboratoire de l'Intégration du Matériau au Système - UMR 5218

Ver/Abrir

Metadatos

Compartir este ítem

Licencia de uso del documento

Noise spectroscopy study of methylammonium lead tribromide single-crystal detectors: Gamma-ray spectroscopy applications