FREYMOND, Clément; GUINAULT, Alain; CHARBUILLET, Carole; FAYOLLE, Bruno

doi:10.1016/j.polymertesting.2021.107458

GUINAULT, Alain
Laboratoire Procédés et Ingénierie en Mécanique et Matériaux [PIMM]

CHARBUILLET, Carole
Institut de Mécanique et d'Ingénierie [I2M]

Langue

Article de revue

Ce document a été publié dans

Polymer Testing. 2022-02-01, vol. 106, p. 107458

Résumé en anglais

For recycling purposes, the thermal degradation of post-consumed (pc) ABS/HIPS and PP/PE blends derived from waste electrical and electronic equipment (WEEE) was obtained by multiple extrusions. The evolution of molar mass (Mw), melt flow index (MFI), and ultimate elongation (εr) of reprocessed blends was evaluated as a function of extrusion cycles. The degradation mechanism of ABS/HIPS blends corresponds to a random chain scission as indicated by a diminution of εr correlated to an increase in MFI and decrease in Mw after 30 cycles of extrusion. The same type of degradation mechanism occurs on the PP/PE blend as shown by the drop in Mw and thus an increase in MFI by a factor of six but only after 11 cycles, thus suggesting the higher thermomechanical resistance of ABS/HIPS. The beginning of the critical molar mass for embrittlement (M'c) zone was reached around 130 and 200 kg/mol for ABS/HIPS and PP/PE, respectively, which can be related to the beginning of the critical MFI zone around 12 and 63 g/10 min (230 °C/2.06 kg), respectively. As a result, we propose an innovative embrittlement criterion using MFI measurements that allow a quick and easy analysis of post-consumed polymer blends.< Réduire

Mots clés en anglais

WEEE

Recycling

Degradation

Molar mass

Melt flow index

URI

https://oskar-bordeaux.fr/handle/20.500.12278/124350

DOI

http://dx.doi.org/10.1016/j.polymertesting.2021.107458

Lien vers les données de la recherche

https://doi.org/10.1016/j.polymertesting.2021.107458

Unités de recherche

Institut de Mécanique et d’Ingénierie de Bordeaux (I2M) - UMR 5295

Voir/Ouvrir

Métadonnées

Partager cette publication !

Licence d’utilisation du document

Reprocessing of polymer blends from WEEE: A methodology for predicting embrittlement