MAZERAT, Stéphane; DELCAMP, Adrien; PAILLER, Rene; LAMON, Jacques; PLAISANTIN, Hervé

doi:10.1016/j.jeurceramsoc.2018.06.026

Metadatos

Mostrar el registro completo del ítem

Licencia de uso del documento

MAZERAT, Stéphane
Laboratoire des Composites Thermostructuraux [LCTS]

DELCAMP, Adrien

PAILLER, Rene
Laboratoire des Composites Thermostructuraux [LCTS]

Idioma

Article de revue

Este ítem está publicado en

Journal of the European Ceramic Society. 2018-12-01, vol. 38, n° 16, p. 5301-5310

Resumen en inglés

Silicon carbide fibers combine structural and refractory properties making them good candidates for ceramic matrix composite reinforcement, driving their ultimate failure. The fractographic observation after tensile tests of various silicon carbide fibers, belonging to first, second or third generations, reveals the critical flaw location i.e. internal or surface. An etching treatment under pure chlorine at 500–850 °C can be used to transform the fibers surface on hundreds of nanometers and alter the surface-located flaw population. This way, first-generation SiC-based fibers successfully show an asymptotic improvement of tensile strength (up to 60%) and Weibull modulus (up to twice), when etched on 0.3–1 μm depth range. The lifetime of bundles, under static fatigue conditions at intermediate temperature, is consequently multiplied by a factor ranging from 10 to 40 with a narrower dispersion. Nevertheless, the tensile strength could neither be increased on second-generation Hi-Nicalon nor dramatically dropped on third-generation Hi-Nicalon-S fiber.< Leer menos

Palabras clave en inglés

Silicon carbide fibers

Chlorination

Surface flaw

Strength

Lifetime

Metadatos

Compartir este ítem

Licencia de uso del documento

Improvement of silicon carbide fibers mechanical properties by Cl2 etching

Idioma

Este ítem está publicado en

Resumen en inglés

Palabras clave en inglés

URI

DOI

Centros de investigación